On this page
The Factsheet Is the Fund's Report Card, and Most People Never Open It
Imagine a school report card that lists every subject, every teacher, and every exam score, but nobody ever reads past the first line. That is how many investors treat the factsheet. They look at the headline return, nod, and invest. The rest of the document holds the information that tells you whether the return came from sound decisions, a lucky sector, or a portfolio that will behave very differently in the next fall.
The factsheet is free, monthly, and published by the fund house. It is also written in a language of ratios and percentages that can look intimidating on the first read. This guide takes the document apart section by section. You will see what each part means, which numbers matter most, and how to combine them. A worked example with a made-up fund lets you practise the reading before you apply it to a real scheme.
By the end you will know how to move from the first page to a decision in about fifteen minutes, which is roughly how long a careful read should take.
What a Factsheet Is, and Why It Is Published
A mutual fund factsheet is a monthly document that an asset management company publishes for each scheme. SEBI requires fund houses to make scheme information available on a regular basis, and the factsheet is where most of that information sits together in one place. The document is typically published monthly and is available from the fund house's website, from the AMFI website, and through many investment platforms.
Two things to remember before you read. First, the factsheet reports past data. Returns, holdings, and ratios all describe a period that has already ended. Second, the factsheet has an as-on date for each section, and the performance, portfolio, and risk figures may not share the same date. Always check the dates before you compare.
The Sections of a Factsheet, in the Order to Read Them
Read the factsheet from top to bottom in this order. Each section sets up the next.
1. Basic information: the objective, the category, the benchmark, the NAV, the assets under management, the plan options, the minimum amounts, the exit load, and any statutory lock‑ins (for example, ELSS schemes have a mandatory 3‑year lock‑in). The category tells you the job the fund is supposed to do. The benchmark is the yardstick.
2. Fund manager details: the manager's experience, the period for which the manager has run the scheme, and any change in the team. A long, stable tenure gives you more history to judge. A sudden change deserves a closer look at the strategy.
3. Portfolio composition: the asset allocation between equity, debt, and cash, the top 10 holdings with their weights, and the company and sector allocation. This shows where the money actually is.
4. Performance: returns over several periods, usually since inception and for the longer periods such as 10, 5, and 3 years, plus the one-year figure. Compare the scheme with its benchmark over the same periods.
5. Risk and cost ratios: standard deviation, beta, Sharpe ratio, R-squared, the expense ratio, and portfolio turnover.
6. The riskometer: SEBI's risk label, on a scale from Low to Very High.
What the Key Ratios Mean
The ratios sound technical, but each answers a simple question.
• Standard deviation measures how much the fund's returns swing around their average. A lower figure means a smoother ride.
• Beta compares the fund's movement with its benchmark. A beta of 1.1 means the fund has tended to move about 10 percent more than the benchmark, in the same direction.
• Sharpe ratio asks how much return the fund earned above a risk-free rate for each unit of volatility. A higher figure means more return for the risk taken. The formula is the fund's return minus the risk-free return, divided by the standard deviation.
• R-squared shows how closely the fund's returns follow its benchmark. A figure near 100 means the fund moves almost exactly with the index, which matters if you are paying an active fee.
• Expense ratio is the annual cost of running the scheme, expressed as a percentage of assets. It includes management and distribution costs and other administrative charges.
• Portfolio turnover measures how much of the portfolio the manager trades over a year. High turnover can mean higher trading costs, which feed into returns.
No ratio should be read alone. A high Sharpe ratio backed by a small, concentrated portfolio tells a different story from the same ratio backed by a diversified one.
A Worked Example With a Made-Up Fund
The fund below is fictional. Its figures are invented to show how the sections fit together. Do not treat them as real.
| Section | Example Fund Alpha |
|---|---|
| Category | Large and mid cap equity |
| Benchmark | A large and mid cap index |
| Manager tenure on this scheme | Six years |
| Equity, debt, and cash | 96 percent, 1 percent, 3 percent |
| Top 10 holdings | 48 percent of assets |
| Three-year return (annualised) | 14 percent |
| Benchmark three-year return (annualised) | 12 percent |
| One-year return | 9 percent |
| Standard deviation | 16 percent |
| Beta | 1.1 |
| R-squared | 93 |
| Expense ratio | 1.2 percent |
| Portfolio turnover | 35 percent |
| Riskometer | Moderately High |
Start with the category and the benchmark. The fund is in the large and mid cap category, so its job is to hold a blend of established and growing companies. The benchmark is the yardstick for that job.
Next, the manager. Six years on the scheme gives you a meaningful track record to judge.
Then the portfolio. Cash at 3 percent is low, so the fund is almost fully invested. The top 10 holdings make up 48 percent of assets, which means nearly half the money sits in ten companies. That is a sign of meaningful concentration, so you should check whether the ten names are what you expect.
Then the performance. Here the arithmetic matters. For a concrete example, if you invest a lump sum of ₹10,000 and the fund’s NAV that day is ₹50, the fund allots 200 units (₹10,000 ÷ ₹50 = 200 units). If the NAV later rises to ₹65, those 200 units are worth ₹13,000 (200 × ₹65), showing an unrealised gain of ₹3,000. It grows to about ₹1,48,154, because 1.14 raised to the power of 3 is about 1.4815. At the benchmark's 12 percent, the same money would have grown to about ₹1,40,493. The fund's advantage over three years is about ₹7,661 on ₹1,00,000. That is a real difference, but it came with more volatility, which the next step tests.
Then the risk. A beta of 1.1 means the fund tends to move about 10 percent more than its benchmark. Suppose you assume a risk-free rate of 6 percent for illustration. The Sharpe ratio is then the fund's return minus the risk-free rate, which is 14 minus 6, equal to 8, divided by the standard deviation of 16. The result is 0.5. Compare that figure with other funds in the same category, because the Sharpe ratio means little on its own. An R-squared of 93 says the fund follows its benchmark closely, which means you are paying for a portfolio that behaves much like the index.
Finally, the costs. A 1.2 percent expense ratio, set against a return that only beats the benchmark by about 2 percentage points, is worth weighing carefully. A portfolio turnover of 35 percent means a moderate amount of trading.
The conclusion of this example is not that Fund Alpha is good or bad. It is that the fund has delivered a higher return than its benchmark, with higher volatility, a concentrated top ten, and a cost that matters. Whether that suits you depends on your goal, your risk tolerance, and what else you already own.
The Factsheet Manual: Do's, Don'ts, Pros and Cons
Do
• Do read the latest factsheet, not the one you saved last year. Portfolios and ratios change month to month.
• Do compare each scheme with its own category and benchmark, not with schemes in other categories.
• Do check the as-on date for each section, since performance, holdings, and risk figures can differ in date.
• Do read the top 10 holdings and the sector mix, then compare them with the other funds you own.
• Do note any change in the fund manager or team, and check why it happened.
Don't
• Don't rely on the headline return alone. A high return with high volatility is a different product from a smooth one.
• Don't read ratios in isolation. Use them together, and compare them within the same category.
• Don't assume the riskometer is a full description of risk. It is a useful label, not the whole picture.
• Don't treat the example in this guide as a real fund. The figures are made up.
Pros
• The factsheet is free, standardised, and published monthly.
• It brings together performance, portfolio, costs, and risk in one document.
• Comparing factsheets across schemes in a category is a fair way to judge them.
Cons
• The document reports the past. It cannot tell you what will happen next.
• Ratios are calculated over a chosen period, so a different period can give a different answer.
• Length and technical language can discourage investors from reading the whole document.
Where Zomint Fits When It Reviews a Factsheet
When you weigh Direct versus Regular plans, remember it is a structural trade‑off: Direct plans remove distributor trail commissions and typically lower the TER by about 0.65%–0.90% per year (roughly ₹6,500–₹9,000 a year on a ₹10 lakh portfolio). Balance that fee saving against behavioural support: AMFI and CRISIL mutual fund holding‑period analysis (data updated through FY2023‑24) shows about 21.0% five‑year+ SIP folio retention for Regular plans versus about 12.4% for Direct plans, and behavioural‑drag studies (Dalbar QAIB and Axis Mutual Fund investor‑return analysis) estimate retail investor shortfalls of roughly 2.0%–5.0% per year; cite these sources when deciding whether lower TER alone is the better choice. Those are the same parts of the factsheet this guide has walked through. The website says the team monitors funds, the asset mix, and goal progress, with quarterly reviews. Mutual fund investments are subject to market risks. Please read all scheme‑related documents carefully before investing. ARN‑321107. Fund names mentioned in this guide are illustrative and do not constitute personalised investment advice.
If you want to practise the reading on your own holdings, bring the latest factsheet for each fund and ask a qualified professional to walk through the ratios with you. Ask how the ratios were calculated and over what period.
Frequently Asked Questions About Mutual Fund Factsheets
What is a mutual fund factsheet?
It is a monthly document an asset management company publishes for each scheme. It sets out the objective, portfolio, performance, risk, and costs of the scheme.
Where can I find a factsheet?
On the fund house's website, in the page for the scheme. It is also available through the AMFI website and many investment platforms.
What does the riskometer tell me?
It is SEBI's label for the scheme's risk, from Low to Very High. Use it to check whether the scheme fits your tolerance for falls.
Is a higher Sharpe ratio always better?
Generally, a higher Sharpe ratio means more return per unit of risk. Compare it only with funds in the same category, and check other measures too.
Why do the performance and portfolio dates differ?
Each section can be prepared on a different as-on date. Always check the dates before comparing figures.
Author & expert reviewer
Know who wrote this guide, who reviewed it, and where to find their professional profiles.

Khushi Bisht
Senior Content WriterAuthor of this guide. See her professional profile for background and experience.
View author profile
Vishal Singh
Head of Investments, ZomintIIM Lucknow alumnus. Ex-hedge fund professional. Zomint's team page lists CFA Level II.
Experience & credentials